LORD
EXTENSION
LORD
LORD
H 8mm
The support Lord is the support with a very low thickness and with a fixed matrix able to raise outdoor flooring starting from 8 mm, which can be implemented in 4 mm steps.
Unique in the world with bi-material head e triple tabs in different thicknesses (2/3/4mm).
| Code | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet |
|---|---|---|---|---|---|---|---|---|
| L8000000 | 8 | 6,95 | 39x39x16 | 36 | 256 | 80x120x120 | 100 | 4200 |
Note: the head Lord it can be ordered, on request, with the fins in a single thickness, 2 mm or 3 mm. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
EXTENSION
EXTENSION
>The extention element of Lord is made of unique combined polypropylene, elastic , strong and versatile, suitable for all types of substrates.
The Lord extension element is designed for raise the support Lord in steps of 4 mm.
It is recommended overlapping up to a maximum of 3 extensions.
The Lord extension element is highly resistant to both thermal excursions, continous walking and load (CC) stresses.
| Code | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet |
|---|---|---|---|---|---|---|---|---|
| L4000000 | 4 | 4,76 | 33x33x12 | 48 | 179 | 80x120x120 | 100 | 4800 |
Note: the head Lord it can be ordered, on request, with the fins in a single thickness, 2 mm or 3 mm. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
increase the thickness by Lord 8 mm is sufficient stack one or more extensions. Overlapping is recommended up to a maximum of 3 extensions, as for higher heights it is preferable to use supports Junior J2 or Queen Q1.
It is a TPE compensator made up of 4 petals of two different thicknesses, placed side by side, respectively of 2,5 mm and 1,5 mm and gathered around a central attachment point.
Registered Office:
Via Gallodoro, 57
60035 Jesi (AN) - Italy
Production site:
Via Pian di Morro II, 15
60043 Cerreto d’Esi (AN)
Commercial & Logistics Headquarters:
Viale Commercio, 17
37044 Cologna Veneta (VR)
Tel. +39 0442 412042
Email: info@dpssolving.com
© 2023 DPS SOLVING SRL | VIA GALLODORO, 57 | 60035 JESI (AN) - ITALY | VAT number and tax code 02669610426 | REGISTRATION RI DI ANCONA N. 02669610426 | REA: AN / 205831 | SHARE CAPITAL € 100.000 IV | PEC: DPSSOLVING@PEC.IT
Privacy Policy | Cookies Policy
Advanced solutions for elevated floors and acoustic comfort
