K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K1
K1
H 30 - 41 mm
KING K1 is the support of the range King for raised outdoor floors with the lowest height,excellent for levelling very low slopes. KING K1 can elevate the floor from a minimum of 30 mm to a maximum of 41 mm thanks to the adjustable screw that slides inside the central thread of the support.
Thanks to the technology of the Converter system the support can switch between the fixed to the self-leveling base option with a simple movement. The self-leveling base allows you to level the surface up to 5%.
KING 1 is the best choice for restructuring interventions where you need to flatten a surface in order to connect different panels and have a plain floor. For example, if you have a ground with a slope of 5 cm, you can use KING K1 (30 mm) with some classic 20 mm plates, so as to perfectly connect them and have a plain surface
The head of the support is coated with high quality rubber and is equipped with tabs made with flexible rubber, to place the plates and space them by 2, 3 or 4 mm according to the needs, creating a perfect and functional joint for the outflow of rainwater.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K1 | K1030041 | - | 30 – 41 | 7,1 | 39x55x23 | 40 | 275 | 80x120xH248 | 20 | 800 |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K2
K2
H 41 - 63 mm
KING K2 is the support of the line King designed to create raised outdoor floors of contained height. KING K2 is characterized by a height that can vary, thanks to the adjustable screw, from a minimum of 41 mm to a maximum of 63 mm, with extreme precision. This item allows you to level the surface even when the floor is completely laid, without effort and avoiding hand movements that can compromise the safety of the operators.
The lower part of the base of the supports KING is equipped with large grooves .If you need to place the supports near the edges of the floor, these grooves make cutting operations extremely easy and ensure a rounded surface at the edges of the support, which avoids the common problems of cracking in the waterproof covering.
KING K2, like all the supports in the range KING, thanks to the Converter system , choose the mode of use between fixed and self-leveling, can be switched from the fixed to the self-leveling mode with a simple gesture, all thanks to the <b>Converter System</b>.
For example, in large terraces, where the floor is reasonably thin, KING K2 can be placed together with supports KING K1 to create the desired slope of the final surface. Depending on the length of the area and the number of supports, KINGXNUMX and KINGXNUMX can guarantee effective disposal of rainwaterand perfect continuity.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K2 | K2041063 | - | 41 – 63 | 7,4 | 39x55x23 | 40 | 335 | 80x120xH248 | 20 | 800 |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K3
K3
H 63 - 95 mm
KING K3 is the support of middle size of KING range for outdoor elevated floors. KING K3 allows you tolevel the floor from a minimum of 63 mm up to a maximum of 95 mm.The movement of the screw allows the head to raise, and therefore also raise the plates to the desired height with millimetric adjustment. In addition, thanks to the practical "Power Key", the supports KING K3 can be adjusted even with a completely laid floor, effortlessly and in complete safety.
KING K3, like all support of the KING range , is a product consisting of very few components, which thanks to the technical solutions developed by the developers DPS Solving, allows the maximum versatility of use, using a single element. Switchable from fixed to self-leveling thanks to the Converter System, KING allows you to create flooring solutions as elaborate as the creation of one perfectly plain raised floor on terraces or substrates with variable slopeslike the typical humpback shape, generally designed to facilitate the disposal of rainwater in very large areas. The self-leveling system permitted by the self-leveling movement of the base of KING allows you to level slopes of the laying surface up to 5%. This allows us to provide for the supply only an extremely limited number of models in order to meet the most diverse installation needs.
KING in fact overcomes the eternal dichotomy between fixed and self-leveling supports, offering the market a unique solution that halves warehouse stocks and the jagged order of applicators.
The head in bimaterial of the support KING made of anti-noise rubber, it's also heat-resistant and consequently offers a durability that has no equal on the market. KING offers certainties to its customers, with an exclusive 5-year WARRANTY against manufacturing defects.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K3 | K3063095 | - | 63 – 95 | 8,955 | 39x55x30 | 28 | 283 | 80x120xH256 | 20 | 560 |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K4
K4
H 95 - 152 mm
When the raised floor heights begin to rise, KING K4 is the right product for your projects. With a height that can vary from 95 to 152 mm, KING K4 is the support for non-driveway outdoor raised floors, designed to support the weight of any type of flooring, from wood to stoneware, from marble to natural stone, from cement to composite materials, as long as they are declared self-supporting by the manufacturers and suitable for use in elevated over cantilevered structures. The support is able to support the weight of the floors, people and any furniture placed above the flooring.
As for the substrate, the supports of the range KING are suitable for laying on properly pressed cement, gravel, soil and vegetation through the rolling or beating of waterproof sheaths of which they preserve the integrity in all installation details, but you can place these supports onto old glued floors, substrates exposed to water stagnation, irregular substrates and thermal insulators declared “walkable” by the manufacturer.
KING K4, due to the height it can reach even without the aid of extensions, is suitable for the creation of steps on the raised floor, quickly and easily. Indeed all supports KING can be mounted on a first level of raised flooring made with other supports KING, to obtain valuable multilevel flooring while maintaining maximum aesthetic consistency, in full functionality. The range KING, thanks to simple tricks allows you to create any detail, such as edges, steps, corner steps, wall connections, with always excellent results.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K4 | K4095152 | - | 95 – 152 | 10,8 | 39x55x37 | 24 | 264 | 80x120xH240 | 20 | 480 |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K5
K5
H 152 - 209 mm
KING K5 is the highest height support of the range KING, which allows to raise the floors from 152 to 209 mm. This format is ideal in many situations, such as when you want to transform classic pools with above ground edges in stylish infinity pools. For example, assuming a pool edge that rises 20 cm above the laying surface, it is possible to use KING K5, millimetrically adjusted to a height of 180 mm in combination with the classic 20 mm thick tiles, to perfectly match the height of the existing edge. In addition, the raised flooring made with KING can always be inspected at any time e and can easily accommodate pipes, implants or water drainage elements.
The high quality rubber with which the head is coated, allows the plates to rest on the support without dangerous slipping, while the 4 anti-breaking rubber tabs, allow the plates to be lifted and moved when necessary without the risk of being broken due to accidental beating, deterioration due to prolonged exposure to UV rays and bad weather.
Like all the supports in the range, KING K5, thanks to the self-leveling base diameter of 205 mm and the reinforced structure, offers solid support for flooring in every situation and with every inclination. On the basis of the support KING there are in fact 12 containment chambers designed to increase the capacity of the support, thanks to the transfer of the perimeter load of the converter to the external ribbing.
Also the diameter of the head of the supports KING which reaches 130 mm - the widest compared to standard bi-material head supports available on the market - contributes to the perfect stability of the laid surface, which can be made in any material that can be envisaged by the project: KING in fact, it leaves the designers maximum creative and aesthetic freedom, without placing technical limitations on the choice of coverings.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K5 | K5152209 | - | 152 – 209 | 12,1 | 39x55x47 | 18 | 247 | 80x120xH251 | 20 | 360 |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K6
K6
H 159 - 272 mm
KING K6 is the adjustable support made up of two products from the range KING, King K4 + the Extension element P1, which allows to raise the floors from 159 to 272 mm.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K6 | K6159272 | K4 + P1 | 159 – 272 | - | - | - | - | - | - | - |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K7
K7
H 216 - 239 mm
KING K7 is the adjustable support made up of two products from the range KING, King K5 + the Extension element P1, which allows to raise the floors from 216 to 329 mm.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K7 | K7216329 | K5 + P1 | 216 – 329 | - | - | - | - | - | - | - |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K8
K8
H 224 - 380 mm
KING K8 is the supportmade up from two products from the range KING, il King K4 + n ° 2 Extension P1, which allows to raise the floors from 224 to 380 mm.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K8 | K8224380 | K4 + P1 + P1 | 224 – 380 | - | - | - | - | - | - | - |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K9
K9
H 280 - 436 mm
KING K9 is the adjustable support made up of two products from the range KING, King K5 + n ° 2 Extension element P1, which allows to raise the floors from 280 to 436 mm.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K9 | K9280436 | K5 + P1 + P1 | 280 – 436 | - | - | - | - | - | - | - |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
K10
K10
H 340 - 545 mm
KING K10 is the adjustable support formed by 4 products of the range KING, King K5 + n ° 3 Extension element P1, which allows to raise the floors from 340 to 545 mm.
| Code | Composition | Size range (mm) | Box weight (kg) | Box size (cm) | Boxes/ pallet | Pallet weight (kg) | Pallet size (cm) | Pieces/ box | Pieces/ pallet | |
|---|---|---|---|---|---|---|---|---|---|---|
| K10 | K0340545 | K5 + P1 + P1 + P1 | 340 – 545 | - | - | - | - | - | - | - |
| FLAT HEAD | K17007SA | - | Ø 130 | 18,5 | 39x55x37 | - | - | - | 440 | - |
| EXTENSION | K17008 | P1 | 113 | 8,91 | 39x55x30 | 28 | 138 | 80x120xH256 | 40 | 1120 |
Note: the standard thickness of the tabs is 4 mm. On request, supports with 2 or 3 millimeters tabs are available.
The products cannot be sold individually but only in full boxes. >> Recommendations for laying an elevated floor on an insulating and waterproof package: We recommend the use of EPS or XPS panels or other thermal insulation, with crushing resistance values “suitable for the compressive strength exerted by raised flooring on PP supports”. Average recommended value is XNUMXkPa. Failure on verification of the suitability of the insulating panel could cause the panel to crush under the weight of the raised floor, causing unsightly movements of the entire flooring; furthermore, the excessive ductility of the insulating panel could compromise the performance of the waterproof covering and / or the stability of the supports of the raised floor. In this situation we recommend a preliminary consultation both with our technicians and with the insulation panel manufacturers; if there are any doubts about the compressive strength of the panel, we always suggest the use of our Skudo separators for the sole protection of waterproofing (Page XNUMX - XNUMX).
Choose between fixed or self-leveling mode, by switching the functionality of King with a simple gesture.
The supports studied by DPS Solving help you to create long-lasting and pleasant raised wooden floors . This type of installation offers great ventilation ed prevents water from stagnating in contact with wood, preserving it over time.
Large space for the variety of the plates and infinite possibilities in laying multiformat plates. The perfect flatness of the surface marries the elegance and performance of resistance of the ceramic.
Registered Office:
Via Gallodoro, 57
60035 Jesi (AN) - Italy
Production site:
Via Pian di Morro II, 15
60043 Cerreto d’Esi (AN)
Commercial & Logistics Headquarters:
Viale Commercio, 17
37044 Cologna Veneta (VR)
Tel. +39 0442 412042
Email: info@dpssolving.com
© 2023 DPS SOLVING SRL | VIA GALLODORO, 57 | 60035 JESI (AN) - ITALY | VAT number and tax code 02669610426 | REGISTRATION RI DI ANCONA N. 02669610426 | REA: AN / 205831 | SHARE CAPITAL € 100.000 IV | PEC: DPSSOLVING@PEC.IT
Privacy Policy | Cookies Policy
Advanced solutions for elevated floors and acoustic comfort
